It depends on the size of the hole.
For the smallest holes (less than an inch or so), you need spackling paste and a putty knife. Fill the hole with spackle, wipe it level with the wall with the putty knife, and let dry. Paint.
For medium holes (about 1" to 8" wide), you will need an aluminum patch, which is sort of like a mesh grid, patching plaster, a sanding sponge, and a large putty knife. Put the mesh grid up to the hole, and use the plaster to coat the grid and blend it into the surface of the drywall. After it has dried, sand it even. Prime and paint.
For larger holes (larger than 8"), you will need a drywall patch, joint compound, a sanding sponge, drywall screws, a screwdriver, and a compound knife (to spread the joint compound). Cut a larger, well-shaped hole around the hole that you are trying to repair, in the shape of a rectangle (for example, if you had a football-helmet shaped hole in your wall, you'd cut around the hole in the shape of a rectangle) and remove the excess drywall. Cut the drywall patch to the same size as the hole you just made. Screw the piece of drywall into the joists inside the hole. Use joint compound to cover the drywall screws and blend together where the drywall patch meets the old drywall. After it had dried, sand it even. Prime and paint.
Drywall is really actually made up of gypsum board, which is also called plaster board. The gypsum paper is smashed between two thick sheets of paper.
0.5 is one half .
A US quarter is 1.75 mm thick. Canadian quarters are 1.58 mm thick.
Drywall mud is the thick, goopy white stuff you use to fill the seams between boards.
No
.76- .83 mm thick
Drywall is a panel made of gypsum plaster pressed between two thick sheets of paper. Drywall is a necessity in most building projects. Some examples of drywall equipment are drywall arches, decorative outside corners, celling accents and trays, panels on walls.
Depends where you buy it, but around $34.
You don't short of buying a better primer. I usually find it too thick.
Murder holes, tall towers, arrow holes, and thick walls.
For stirring thick soups.
The weight of a sheet of drywall depends with its thickness. For instance the standard 1.27 cm thick sheet of drywall measuring 4'x8' will weigh approximately 26 kilograms while ultra light Panel will weigh 6 kilograms less, for a total of 20 kilograms. A 4x8 sheet of drywall that is 1/2 inch thick weighs 54 pounds. A 4x8 sheet that is 5/8 inch thick weighs about 70 pounds. The weights given are for standard drywall. 2000/54= 37 sheets 2000/70=28.5 sheets 29 would be just over a ton.