You have to repair the malfunction that caused the code stored in the abs computer.You have to repair the malfunction that caused the code stored in the abs computer.
Have the abs system checked for codes and repair the cause.Have the abs system checked for codes and repair the cause.
If you have an ABS, take out ABS fuse and see what you get
form_title=ABS Repair form_header=The brake system should be kept in excellent condition. Has your ABS light showed up on your dash, signally a repair?= () Yes () No What types of problems are you having with your breaks?=_ Do the brakes chatter or squeal?= () Yes () No
To repair ABS hydraulics locate the ABS modular unit and drain the brake fluid. Close the bleeder and turn off your engine, then refill the reservoir.
At any Kia dealership parts counter
It is not easy to repair an electric window on a 2003 KIA Spectra. If a person wants to repair the windows, the door panels will have to be removed. It may be best to take the vehicle to a repair center.
Repair the ABS system so it functions.
You need the have the abs codes checked. You can then diagnose and repair the cause.
Problem with the ABS (Anitlock Brake System). Take it to a professional for repair.
You need to find out what is tripping the ABS light (a mechanic with an ABS code reader) and then repair it.
FIRST YOU MUST HAVE A obd2 engine scanner and then scan the ABS brake system to be able to determine what is wrong with it. Then repair as needed
means your abs (brakes) NEEDS REPAIR OR SERVICE
ABS stands for Anti-Lock Brake System. If the ABS light is on, your ABS has a problem. Clean all wheel sensors of any debris. If that does not help, Seek out a professional for this repair.
Problem with the Antilock Brake System, (ABS). The repair is best left to a professional.
simple you cant. I can be done, but only using a Methyl Methacrylate Adhesive. Do not allow fiberglass to be used for the repair, all plastic steps manufactured to date are made of ABS plastic regardless of the name (Rovel, Centrex, Weatherpro, Geloy,) all are ABS with the above names as the weather-able top coating. Fiberglass emits gasses during the cure process that get trapped between the repair and the ABS that causes deterioration of the ABS and eventual failure of any repair made with fiberglass. Once the repair fails the gasses from the fiberglass usually renders the ABS too weak to accept any type of repair, then the step will need to be replaced.
It means there is a problem with the ABS. As the ETC is tied into the ABS, that light will also come on. Take it to a professional for diagnosis and repair.
Take it to a rakiator repair shop if it is metal. If it is plastic, replace it.
www.kiatechinfo.com Free website, has diagrams and repair info.
Repair whatever's causing the fault. So long as the fault exists, the ABS light will remain on.