Headlights Tail and Brake Lights
Chevy Blazer
Chevy Blazer S-10

How do you repair your 1998 Chevrolet Blazer headlights that do not work at night?

868788

Top Answer
User Avatar
Wiki User
Answered
2015-07-15 19:22:20
2015-07-15 19:22:20

i have a 98 blazer and read in the manual that you have to use the dome override button for this

Dome override button has nothing to do with headlights,but with the interior lights in your vehicle. So it depends on what your problem is exactly.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


I would start with the fuse, the bulbs and then the switch...in that order. If it ends up being bulbs, see sources and related links below.

It is probably the running lights that are working and the regular headlights aren't working because of the switch or wiring. TAke it to a garage.

Use your high-beam headlights at night whenever it is legal and safe.

You would not drive it at night or when the law says you must display headlights.

Headlights need to be used at night, when it is dark, and when windshield wipers need to be used.

so you can see at night.(:

The headlights illuminate the road ahead of the vehicle allowing you to see in the darkness.

well 1 headlight will just be a 5 day fix-it most likely, if you are driving with no headlights at night you're goign to have a problem....

The headlights on a 96 Chevy Silverado are adjusted by turning the screws on the top and side of the headlights. It allows the lights to be adjusted for optimal night vision.

Stop the car in a safe place at night. Put the car into neutral and apply the handbrake. Switch on the headlights. Get out of the car and look to see that the headlights are working.

when it is raining or at night. Also generally when it is dark.

At night or when its realy dark like bad over cast

It depends on what type of headlight you have. What auto do you have?

You can overdrive their range if you go to fast but you are not supposed to

The idea of headlights is two-fold: * to see where you are going at night * and to be "seen" at night If your headlights are blacked out, how on earth will you be able to light your way at night or be seen by oncoming traffic? Headlamps must emit a certain candlepower in order to be street legal at night. It may not be "cool" looking to have clear lenses, but there is a safety factor that greatly outweighs "being cool". The life you save might just be your own.

You should never over drive your headlights because you are then driving too fast to stop in time for hazards you see on the road.

At night yes, but in the day no because the sunlight overpowers the headlights and high beam lights.

At night a driver should dim his headlights when an oncoming motor vehicle comes within 1,000 feet. You should switch your headlights from full beam to dipped beam when a oncoming car passes. It is unsafe to leave your headlights on full beam as it blinds the driver of the oncoming car.

Your headlights point straight ahead, not into the curve.

Never look directly into the headlights of oncoming traffic.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.