im not 100 % but i think the down pipe on the exhaust has to come off havent done it yet but my starter is going out and i intend to do it myself so i guess we will find out together im not 100 % but i think the down pipe on the exhaust has to come off havent done it yet but my starter is going out and i intend to do it myself so i guess we will find out together
99 isuzu trooper smell gasoline in the engine compartment
What about this tensioner? How do you remove it, or how do you releave the tension so you can replace the belt?
The firing order for a 99 Isuzu Trooper 3.5l is 1, 2, 3, 4, 5, 6. The number one cylinder is on the left side in the front as you are facing the car.
220-281 Ft Lbs
i got a quote for 380 dollars with a second hand starter
Disconnect the - battery cable Raise and support the vehicle Remove the wiring at the top of starter Remove starter mounting bolts Remove starter
maybe around 300-350
If its a 3.0 td model the crank sensor is situated on the o/s in the engine casing , its accesible from underneath with a long extension and a 10mm socket
the water pump is driven by the timing belt. highly recommended to replace the tensioner, tensioner and idler pullies, and cam seals.
How do I replace the starter on my polaris 250 4x4 Model number is EC250PF00802151. How do I change the stater on a 99 polaris explorer 4x4
Not much-half an hr plus starter (45.00 approx) This is easy enough to do yourself. Most are 2 bolts.
R 134 a