Want this question answered?
Behind the dash is the HVAC housing. The blend doors are in the very center of the box. The dash and HVAC will need removed to access.Behind the dash is the HVAC housing. The blend doors are in the very center of the box. The dash and HVAC will need removed to access.
Before replacing the thermostat or any other component of your Windstar's HVAC system, be sure to check your blend door for functionality FIRST. The most common issue with heat or A/C in the late model Ford windstar is a broken blend door. A broken blend door actuator is almost as common as a broken blend door itself. Typically, the fix requires disassembling the entire dash and replacing the whole plenum box, which can be a costly repair.
you can't replace the lights they are built in to the control head.you must replace the entire hvac control
Behind the dash, connected to the blend knob and runs down to the HVAC housing at the front passenger of the cabin, also behind the dash. The blend door is inside the HVAC housing adjacent to the heater core.
form_title= HVAC Systems form_header= Replace or repair your HVAC system. How old is your existing HVAC system?*= _ [50] Do you want to replace your HVAC system?*= () Yes () No Do you want the system to be Energy Star compliant?*= () Yes () No
limit switch on hvac used to cut off low voltage on heating when system over heat limit
It is in the center of the HVAC housing under the dash.
Replace the HVAC resistor pack, it is defective.
It is in the center of the HVAC housing behind the dash.
If you are refering to the temp blend door actuator, it is located behind the dash on top of the HVAC box. The dash assembly must be removed to gain access.
Switch it out to a Trane
It is in the center of the HVAC housing under the dash. Dash and HVAC need removed to access.It is in the center of the HVAC housing under the dash. Dash and HVAC need removed to access.