answersLogoWhite

0


Best Answer
replace or fix 94 explorer elec windowok, There are (2) Options, 1st, is to goto autozone, and order the Motor, runs about 68.00+tax, most don't have them instock, remove door panel, 3 screws, tape end of flat screw driver wide as you have, or a really wide flat steel crow bar works great, start at bottom left left out and work your way around panel until it comes loose, it will dangle until you unplug the elec.window control unit and the lower right door lights/ reflector lights, the control unit has two Philips screws holding them in and pop it open, next turn the reflector panel door bulb to the left and it will pop out also, now your in business. peel the plastic dust cover off the door and save as much as posiable for reinstall later, next, remove speaker, 4 screws, and pulg harness, now, there are 4 brass color nuts in a row and One that is a funny looking revit cap looking one! you need a 1/2" drill bit, and drill, if you reach through the speaker hole you will feel the 2 bolts holding the Motor to the crank arm, on the out side panel right below the speaker hole you will notice a dimple in the panel, you have to drill the out to get to the screw behind the panel to remove the motor! after this, you can reach in and remove the other to nuts and replace with the new motor and put back togerther in the same manor! Or wanna save some money! after removeing the motor you can remove the cover off the old motor 5 screw, and clean out the trashed out grind up old bushing and greese, and clean, now go to autozone or a hardwear store and buy 3 round 10mmx10mm cylender type bushing, and sand the edges off a little and apply some greese and replace where the old ones were and put back together for about 5.00 and your in business! please look at the link and see for yourself, and you will feel a little better about this. if you fix it, please email me at alanspence5@tampabay.rr.com, good luck.http://www.explorerforum.com/forums/showthread.php?t=145469&page=1
User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace a PS power window on a 94 ford explorer?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace ford explorer rear window hinge?

To replace the Ford Explorer rear window hinge, you have to buy a similar window hinge. Use a screwdriver to open the hinge and replace the hinge but fitting it in the window.


How do you replace a power window motor on a 1997 Ford Explorer?

fordf150.net or f150online.com/forums has helped me with most of my problems.


1997 ford explorer power window fuse?

The 1997 Ford Explorer power window fuse can be found in the fuse box. The location of the fuse will be listed on the inside cover of the fuse box.


How do you fix a power window on a 1997 ford tarus?

Replace the motor.


Where is the power window relay in a 1996 Ford Explorer?

The owners manual shows a 30 amp fuse in the power distribution box in the engine compartment that is used for the power locks/power windows/ and power seats on the 1996 Ford Explorer.


How do you replace evaporator on a 1992 Ford Explorer?

How do you replace evaporator on a 1992 ford explorer?"


Replacing the regulator on a 2006 Ford Fusion how do I replace the actuator on a 2006 Ford Focus with power window?

When replacing the regulator on a 2006 Ford Fusion, you need to follow the instruction on the manual so as to be able to replace the actuator on a 2006 Ford Focus with power window.


Why don't my 1995 Ford Explorer Power Windows work?

it is possible on the 1995 Ford Explorer that a burned out fuse will cause the power windows to stop working. Check the power window relay in the engine compartment relay bank near the battery or the power window fuse in the fuse panel on the driver's side of the interior.


How do you replace a speed sensor on a 1994 Ford Explorer?

how do you replace the overdrive sensor on a 94 ford explorer


Is there a fuse for power windows for a 2002 Ford Explorer?

For a 2002 Ford Explorer, the 30 amp circuit breaker in location #62 of the power distribution box in the engine compartment is the power window circuit breaker. (unfortunately in the 2002 owner's manuals it is labelled accessory delay ) later years are labelled as the power window circuit breaker.


Why 1996 ford explorer power window does not work?

Check the switch first by bypassing if the others work. Start there.


Why does ford explorer power window go down but not up on passenger side?

Bad motor? bad switch?