Take off the panel under your dash on drivers side. You will need a star head tool to take off the panel. Behind the brake pedal you will see something that looks kind of like a 35mm film can. It will have a plug in on the side facing the seat. Unplug it and the turn the switch one way or the other. Pull it out, replace it and plug it back up. You can get the part at Auto Zone for about $18. Take off the panel under your dash on drivers side. You will need a star head tool to take off the panel. Behind the brake pedal you will see something that looks kind of like a 35mm film can. It will have a plug in on the side facing the seat. Unplug it and the turn the switch one way or the other. Pull it out, replace it and plug it back up. You can get the part at Auto Zone for about $18.
how to replace the brake light switch at the pedal of a 2001 ford zx2
You can try to reset your brake light switch by unplugging the brake light switch and plugging it back in. If that does not solve your problem you will need to replace the brake light switch.
The brake light switch, on a Dodge neon, can be found under the dashboard just below the steering column. The brake light switch just unplugs. Unplug the switch and replace with a new one.
In a Classic Beetle, it's screwed into the master cylinder. New Beetles will have it in the vicinity of the brake pedal lever.
How do you replace a break light switch on 1995 Chevy Tahoe
brake light switch is mounted by the brake pedel remove lower panel above brake pedel and then you will see the switch should be able to turn the switch to replace
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
look on the brake pedal you will see a lil switch there that's the brake light switch
The 1999 Chevrolet Malibu brake light switch can be found beneath the dashboard, next to the brake pedal. The brake light switch simply plugs in and out.
The brake light is controlled by a relay switch. If the relay switch is bad the brake lights will stay on. The brake light switch simply plugs in and out. Unplug the brake light switch until you can replace it.
The one on the master cylinder is the brake light switch. The one on the brake pedal is for the automatic transmission, assuming that the car is automatic.
The 1988 Ford brake light switch does not adjust, replace it with a new one.