some slaves are on the out side of the transmission and some are inside if inside you will have to take out the whole transmission to change the slave if this is the case i would change the clutch assembly as well to ensure that i wouldn t have to go back in once the slave was replaced.BUT FIRST you must determine where the slave is located on the outside or the inside...
some slaves are on the out side of the transmission and some are inside if inside you will have to take out the whole transmission to change the slave if this is the case i would change the clutch assembly as well to ensure that i wouldn t have to go back in once the slave was replaced.BUT FIRST you must determine where the slave is located on the outside or the inside...
In a 1988 Pontiac Grand Am you will find the clutch slave cylinder located on the flywheel. You will need to remove the hush panel from the driver's side foot well to gain access to the clutch slave cylinder.
my husband is trying to replace the master cylinder on a 1994 grand am. he was wondering on how to align the gears for the abs.
the library should have a shop manual for this vehicle :)
ignition what? coil, swicth,module, lock cylinder? gm Jim
you need to remove the top engine mount
How do you replace starter on2.3 cy 1991 pontiac grand am
how do I replace water pump 2000 Pontiac Grand AM SE1?
how to replace lifters on a 03 grand am
My 94 Pontiac grand am se quad 4 the clutch is real loose and 1st gear is slipping
A lot.....considering you can't replace a cylinder.... unless it's in a new engine block. :)
Where is the starter on a 1998 Pontiac Grand Am, 6 cylinder
how do i replace a water hose in 1993 pontiac grand am