The switch is located under the dash on the back side of the clutch pedal its about 3in tall and white it snaps on and off. Other than a headache from being upside down its easy to replace.
Replace the clutch pressure switch in your Honda.
How to replace a clutch interlock switch on a 1997 Ford Ranger XLT
n ignition switch on a 1991 Chevrolet astro vanAnswern ignition switch on a 1991 Chevrolet astro van
It is on the acumulator.
replace the switch.
"buy a new car." <-------- thats stupid... its a 12 dollar part from ur dealership. its probably just the rubber piece on top of the clutch that pushes in the clutch switch. these fall off all the time and people automatically replace the whole switch. hot glue a penny on the petal where it pushes in the clutch switch and it should start like a charm.
The clutch safety switch keeps the car from starting unless the clutch is pushed in. On the top of the clutch pedal there is a little black box with a plunger on it. When the clutch is pushed in the electrical connection to the starter solenoid is completed. The switch just unscrews from the bracket.
very carefully
Rotate the switch on the rod for the master cylinder for the clutch. Take out the retaining clip. Remove the clutch pedal position switch from the rod. Disconnect the electrical plug. Plug the new clutch pedal position switch in and installation is the reverse of removal
Unplug your battery, pull off the connector, unscrew the bolt and remove the switch then replace and work backwards.
Clutch interlock switch may be misaligned or faulty.
the switch is located at the top back of brake pedal!!