In the corner of the window is a black plastic triangle. Take a flat head screw driver and pop it off. It has some plastic tabs that hold it on. Then you will see 3 screws. Unscrew them. Rock the mirror assembly with your hand and it should fall off. You will then notice a connector for the mirror motor. Disconnect it. Replace in reverse order.
you have to remove the dash and every thing attached to it. Is it the same for a 1988 Mazda 929?
It is bolted on from the inside of the door.
Remove the inside door panel of your 1993 Chevrolet Lumina. Remove the passenger mirror wiring harness. Remove the passenger mirror retaining bolts. Reverse the process to install the new passenger mirror.
I have a 2000 Mazda protege. My fuel filter is in the gas tank and is not something you can replace. John B.
If you go to www.automirrorglassonly.com it will tell you how to replace the mirror glass for the outside mirror. You can buy one there too. The outside mirror is just glued on , some parts stores sell replacement glass and you can glue the new one on
someone please post how to do this, ive got a 95 dx and i need this guide to fix it, not replace it
1993 protege has it in tank uder rear seat. do not need to drop tank.
You must replace the assembly/ or the entire door unit
Under hood on driverside inner fender.
Go read the instructions, unless you're too MAN enough to do it.
If you want to replace just the glass,you tilt the mirror to the inside and you depress the two tabs that hold it in.Slide the glass out and there is one tab on the back that depresses and the mirror slides out.If you want to replace the whole mirror,the handle on the remote is held on by one screw or if a non remote the plastic cover snaps off.Then there are three screws that hold it on to the door.
driverside kick panel