Want this question answered?
Remove the front bumper to remove the radiator
buy a new bumper, remove the old one, and attach the new bumper
remove headlight there is 2 bolts there ,remove enter fender there is one nut that bolts the bumper to the fender,there is two bolts at the bottom of the fender next to the door.then one bolt in the middle of fender next to the door. then you got the bolts on top of fender under hood
Remove the headlights, remove the hood and you probably need to remove the bumper. All along the fender should be bolts that secure the fender to the van. There will probably be about 6 on top, 2 or 3 on the bottom and a few along the side.
Getting the alignment(gap) right is the hardest. Just need to remove the headlight, raise the hood unbolt the fender bolts. The fender bolts near the door jam, You get access with the door open. You might need to remove the bumper to remove.
The Toyota Corolla front bumper is held in place with eight retaining bolts. Remove the retaining bolts and the bumper will come off.
how to remove front bumper on Toyota avensis 2003
Remove the Philips screw on each corner of the bumper. Remove the clips that hold the grill and bumper to the radiator support. Pull the bumper forward. Remove the 10mm bolts that mount the head light to the radiator support. Remove the 10mm bolt that mounts the head light to the fender. Remove the 10mm bolt that mounts the head light to a bracket near the bumper beam.
To replace a Pontiac Grand Am bumper cover, start by taking out either the three bolts on the side of the fender or in front of the wheels. Remove the top pushpins to remove the cover. Push back the two pins for each headlight, and pull them up. Unplug the lights. Then, get the replacement bumper, and snap it into place like the previous one.
There should be 2 access plugs on each side in the trunk. Remove the bolts and slide the bumper out. Maybe a foot in from each side.
AnswerHow to replace the headlight (low beam) on a Toyota Corolla 2003? To replace the entire headlamp assy you must remove the bumper cover. There are fasteners across the top, inside fender skirt and along the bottom and also a few clips inside the grill that are accessible from underneath. Three bolts fasten headlamp assy to the radiator support and there are three quick electrical connections.
remove bumper, replace with new one.....easy huh ?