Unfortunately, the front bumper has to come off. Simply park your car and engage the e-brake for safety. Next you would need to turn your wheels completely to either the left or right. Whichever way you turn you wheel, you would need to start on the opposite side (ie.. if you turn your wheel to the right you need to start on the left side of the vehicle) Once your wheels are turned, it will clear space needed to remove bolts and snaps located in the front wheel well area. The snaps are used for the black plastic guards, you would need to remove both sides first, remembering to alternate turning your wheels to provide yourself the necessary work room. Once the black plastic guards have been removed, there are also 4 screws located in the front underside of the bumper that will need to be removed also. Once the plastic guard pieces are off, you can now begin bumper removal. Start by opening your hood. Located under the hood are two more snaps that hold the grille in place. Remove those snaps. After they are removed, return to the wheel well area of either the right or left side and locate the bolt that attaches the bumper to the fenders. It is located behind the headlight assembly where the fender and bumper meet. This bolt has a large Phillips head slot but can also be removed with a 10mm metric socket. Remove the bolts on both sides. After bolts on both sides have been removed you can now slide the front bumper out of the latches that hold it in the front. From there the assembly is exposed and can be removed after removing the three bolts that hold it in place. Replace the assembly and re-assemble in reverse order as dis assembly instructions.
go to back of headlight assembly and twist it out.
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
My daughter has a 2002, and you must take it to the dealer, so we were told.
The headlight adjustment screws on a 2001 Nissan Altima are located on the sides and back of the headlight assembly. They allow for small changes to be made to the position of the beams.
yes
how to replace an altinator in a 2005 nissan altima
Yep the bulb socket should twist out and then you can repalce the bulb. If you want to replace the whole headlinght assembly then I D.K.
One headlight not working
To replace the headlight bulb in a Nissan Pulsar a person must first find the headlight assembly which is slightly behind the lamp housing. Once the headlight assembly is accessed, all an individual would have to do is loosen the bulb a half turn and the whole thing comes out, then replace with the new bulb using the reverse method.
You will need at least $300 to replace a radiator in Nissan Altima.
How do you replace a water pump on a 98 nissan altima?
I need to replace the back window of a 1999 Nissan Altima how do I do this