(1) Open the hood (2) Reach behind the headlight assembly and unlplug the electrical connector, then remove the rubber boot (3) Release the bulb holder retaining clip, then pull the lamp assembly out of the headlight housing. Installation is the reverse of removal. Use caution handling halogen bulbs - especially the new one. Grasp it by the base only - avoid touching the glass bulb with your bare fingers.
Honda didn't start making the CR-V until 1997. Sorry.
You pop the hood take and reach behind the headlight and pull off the bulb cover then pull the bulb out and put the new one in.
== ==
drop the bumper and take the headlight housing out
9003 or H4, same bulb.
To change a Honda 300 Fourtrax headlight, first unscrew the lens and remove it, twist the bulb out of the socket, insert a new bulb and then replace the lens.
call macgyver
To change the headlight on a 1985 Honda Spree scooter remove the headlight housing. The scooter headlight will be mounting on the rear of the housing. Remove it and replace the bulb.
Replacing a headlight bulb on a Honda Passport is very easy to do. The hood will need to be opened to change the bulb. The old bulb can be pulled off by using the connector and the new one put in. No tools are required.
You replace the bulb the same as a 1998, which is answered further down the page.
The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.
Replace headlight bulb only when blown.