a manual will help with diagnosis and repair, and a shop manual should be available at the local library in the reference section, make copies of the right pages, good luck...:)
1997 Toyota Camry ignition switch removal
This is for a 97 Blaazer but it is the same procedure as I used it to replace the switch in my own 97 Bravada.
You will need to remove the ignition switch retaining ring. Pull the ignition switch barrel out. Remove the wiring harness from the back of the ignition switch. Reverse the process to install the new ignition switch.
No, you do not.
It's the ignition switch. Replace it. All will be well.
Do you mean the electrical ignition switch or the cylinder lock and key..?
you can take it to be replaced it has a recall on them
Pull your steering colum apart along with steering wheel and dash plastic, ignition swith is next to the key tumbler. Swap the parts.
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
The ignition switch is bad.
Where is the ignition module 97 explorer
Do you mean for the door or the main switch on the driver's side? The main switch is very easy to replace... not sure about the door switches.