There are three bolts holding the Power Steering pump bracket in place. They all three must be loosened(not removed). Two go into the front of the engine block. You will need a socket with an extension to reach them. The third is on the bottom of the a/c bracket. Can be a little bit tough especially if your car has headers. Loosen the bolts and push the pump towards the passenger side. It should slide enough to take off the belt and replace. Then reverse the procedure with one exception. Tighten the middle bolt last. It pulls a little extra tension on the bracket and helps tighten the belt a little bit more.
How do you replace the power steering pump for a 1987 Toyota Supra?
How to replace the power steering depends on which component you wish to replace. Let us know what it is and we will get back to you.
white
There were no IROC Camaros in 1991
yes it should all be the same including wiring hookups from 82-92
It does not have a power steering filter.
At the power steering reservoir.
basicaly the same http://www.autozone.com/az/cds/en_us/0900823d/80/1c/f7/9c/0900823d801cf79c/repairInfoPages.htm
You must remove the fuel tank.
In the power steering reservoir located on top of the power steering pump. No pump then it has manual steering.
how do i put a power steering pump on a 1987 dodge Dakota truck v6
125