I can't be 100 % sure as I'm not real familiar with your model, but my earlier Sunfire's bulbs
are accessed from inside the trunk, You'll have to pull the carpet away from the body, then twist out the bulb holders.
You must first remove the trunk door facia. (This is the part with the "Pontiac" lights in it.) Then you can get to the bulb to replace it.
Which bulb, exactly?
If you mean just the bulb, they are accessed from the trunk. Pull the carpet away from the back of the car and untwist the bulb holder. Replace the bulb and screw the holder back in.
take the wheel well out first then reach in and turn bulb socket
The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.
The indicator panel should by carefully pried out. Then you can change the bulb.
One that fits.......
Easier to just jack the car up so that you can get under it look for the blinker bulb assembly twist it should come out if you line up the holes replace and reinsert
You might have to remove the whole tailight bezel to replace that bulb, all the nuts for it are in the rear of the trunk compartment, the type of bulb is a 194 type.
how to replace map light bulb in a 2006 pontiac torrent
it should be a bulb type and is accessible by takin out the retaining screw holding the light in place!
To change the license plate light on a Pontiac Sunfire, first remove the cover over the bulb with a small screwdriver. Gently push on the bulb and turn 1/4 turn to remove the old bulb. Insert the new bulb and snap in the cover.