answersLogoWhite

0


Best Answer
Copy

remove the brake caliper and rotor then you will see three star head bolts remove those and the hole spindle will come out[you may have to persuade it with a hammer]then bolt on new one and your done

User Avatar

Wiki User

โˆ™ 2011-05-28 21:26:01
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Add your answer:

Earn +5 pts
Q: How do you replace a rear wheel bearing on a 1995 Pontiac Bonneville?
Write your answer...
Submit

Related Questions

How do you change a rear wheel bearing on a 2000 Pontiac Montana?

You need to replace the rear wheel hub - bearing and speed sensor inclusive


What tools do you need to remove the wheel cylinder on a 1993 Pontiac Bonneville?

what tools do i need to remove the wheel cylinder on a 1993 pontiac bonneville


How do you change the front wheel bearing on 1993 Pontiac Bonneville?

On the hub.. that you need to replace because you cant just get the wheel baring for the bonneville... you got 3 bolts that need to come out you take them out you get the hub out... put the new hub back in put the 3 bolts in there and put your tire back on. Then there ya go you jus changed your wheel baring.


How do you replace Pontiac vibe front wheel bearings?

The front wheel bearings, of a Pontiac vibe, can be replaced by first removing the front wheel. Next, remove the axle end cap. Remove the bearing and reverse the process to install the new bearing.


How do you find out which wheel bearing is bad on a 2001 Pontiac grand am gt?

how do you find out if wheel bearing is bad on a 2001 grand am gt


Wheel bolt pattern 93 Pontiac Bonneville ssei?

The wheel bolt pattern is 5x115


Do you need to replace the wheel bearing when replacing brake discs on a mark 4 golf gti?

no need to replace wheel bearing unless the wheel bearing is worn out


How do you replace the front wheel bearing on a 2003 Pontiac vibe GT?

Take off the steering knuckle and press out the bearing and hub.Have the new bearing pressed in with the hub and re install the knuckle.


How do you replace the front wheel hub and wheel bearing on 1999 Pontiac grand am?

I found this page with a decent step-by-step process to help guide me in replacing my LH Front Wheel Bearing Assy on my 99 GrandAM GT. It shows how to replace one on a Grand Prix, but they are extremely similar. http://www.paulstravelpictures.com/GM-Wheel-Bearing-Hub-Assembly-Replacement/index.html


How do you replace the rear wheel bearings on a Ford Courier?

How do I put a wheel bearing on with out a wheel bearing press


How do you replace front wheel bearing on 1996 Hyundai Elantra?

how to replace front wheel bearing on 1996 Hyundai elentra


The traction off light and abs light goes off randomly in a 1999 Pontiac Grand Am SE how can it be fixed?

this has to do with the sensor in the wheel bearing, unfortunatly the sensor and wheel bearing are one unit. first you have to find out which wheel bearing it is and then replace it, these can be expensive. I've had to replace both of mine within months of each other. take it to get a diagnostic done they can tell you which bearing it is.hope this helps


How do you replace front wheel bearing on a kawasaki mule 3010?

You can replace the front wheel bearing, on your Kawasaki Mule 3010, by removing the axle. With the axle Remove the wheel bearing will slide off.


How do i replace therear wheel bearing on a Chevy pick-up?

how do you replace the rear wheel bearing on a Chevy pick up


How do you replace front wheel bearing on ford maverick?

Take wheel off, put bearing in


How do you change a wheel bearing on a Pontiac grand prix gtp?

You have to get a new hub with the bearing in it already.


How do you replace front wheel bearing on 1992 eagle talon?

Remove the tire and wheel from your 1992 Eagle. Remove the wheel bearing nut. Remove the wheel bearing and the wheel seal. Reverse the process to install the new wheel bearing.


How do you replace a wheel bearing in a 2004 Toyota Sienna?

Is the wheel bearing on the front or the rear ????.. There is a big difference ...


How to change front wheel bearing on fiesta?

To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.


How do you replace a rear wheel bearing and seal on a 98 Toyota Tercel?

how do i replace a wheel seal


Where is the transmission leaking in a 94 Pontiac Bonneville?

There is a side pan which is sometimes accesable if you remove the wheel.


How do you replace the front wheel bearings on a 95 Plymouth Voyager?

The front wheel bearing is a sealed unit with the wheel hub - replace the hub and wheel bearing unit. Remove the four bolts from the rear of the steering knuckle that connect to the hub bearing unit.


How do you wheel bearing for Volvo s80?

Wheel bearing are what allow wheels to spin smoothing on an axle. A broken wheel bearing can lead to fatal car accidents. To replace a wheel bearing on a Volvo s80 remove the wheel hub and have the bearing pressed out. Press the new bearing into the wheel hub to ensure a safe install.


How do you replace rear wheel bearing on a Ford Fiesta 2003?

Remove the rear tire and wheel. Remove the axle end cap. Remove the wheel bearing seal. Remove the wheel bearing. Reverse the process to install the new wheel bearing.


How do you replace front wheel bearings on Ford Explorer 2003?

How do you replace rear wheel hub and bearing.