remove cluster and replace cable. Reverse removal procedure for installation.
Actually , it doesn't have a conventional speedometer cable , it has an electronic speedometer and a vehicle speed sensor ( VSS ) according to my Haynes repair manual
firstly you find the part off the speedo cable that's broken and then you replace it with a new part then you speedometer will work
According to my Haynes repair manual, 1996 and later models do not use a conventional speedometer cable. They use an electronic speedometer and a vehicle speed sensor (VSS)
There is no Cable it is a speed sensor on the transmission
No, it does not. It's all electronic.
I believe starting on the 1996 Explorer , it went to an electronic speedometer with a vehicle speed sensor ( VSS ) so it doesn't have a conventional speedometer cable
replace window regulator assembly.
no cable electronic speed sensor (wire driven)
The odometer is electric, no cable.
How much should it cost to replace the airbags on a 1997 dodge stratus?
There is no speedometer cable - all is electronic. A speed sensor mounted on transaxle connects to the back of your speedometer cluster, and trasmits that way. It's not mechanical like old cars.
most of the newer spedos are magnet drive , you may want to check , but the usual fix is to replace it ! Good Luck !
Replace if failed.
How to replace or change the 1997 Dodge Caravan 3.3 liter engine
They don't have fuses. The speedometer is controlled by the speed sensor(s) and the temperature gauge is controlled by the coolant temperature sensor.
how to replace the fuel pression regulator for a dodge ram 2500 1997 van.
The 1997 Chevrolet Lumina shifter cable is held in place with a swivel nut on each end of the cable. Loosen the swivel nuts and the cable will come off.
Pretty sure it has an electronic speed sensor which means it doesnt have a cable but instead it plugs into the wiring harness.
It doesn't have one. It uses a speed sensor and drives the speedometer electrically. If your speedometer isn't working, it could be the sensor or it could be broken solder points on the instrument cluster circuit board.
I bought a 1997 dodge ram 1500 larmie and the seller lost the keyless enrty. who do i get a new keyless entry? will i have to reprogram/replace anything on the truck