First you need to disconnect the battery to prevent any short circuit while removeng the rest of the components. then remove the intake manifold and plenum completely by first unpluging all the wiring connected to the tps, idle control sensor and MAF sensor. then unbolt the intake manifold from the cylinder head (9 bolts) once that's done you have to remove the mechanism for shifting gears in order to reach the 2 bolts that hold the starter to the transmission housing then disconnect the positive and negative wires from the starter's selenoid and you are done.
The 1996 Hyundai Accent OBD 2 port is on lower edge of dash next to kick panel
According to my research, A MANUAL transmission 1996 Hyundai Accent weighs 2105 pounds which comes out to 1.0525 tons... An AUTOMATIC transmission 1996 Hyundai Accent weighs 2167 pounds which comes out to 1.0835 tons.
4x114.3
11.9 Gallons
A 1996 Hyundai Accent will use approximately 5 quarts of oil. The oil can be purchased at any auto parts store.
how to replace front wheel bearing on 1996 Hyundai elentra
any brand
yes
it is under rear seats
THe starter/solenoid is bolted to the transaxle bellhousing
10w-30
I had the same problem with a Hyundai Accent 1996. You need to disconnect the speedometer inside the front hood.