Its right there in the front its two bolts i believe look right pest your radiator cap it has a rounded housing and its silver looking
Remove the water supply hose from your 1988 Chevy Cavalier thermostat housing. Remove the thermostat housing bolts. Lift the old thermostat out and drop in the new thermostat.
Drain the water from your 1988 Chevy Corvette cooling system. Remove the water supply hose from the top of your thermostat housing. Remove the thermostat housing bolts. Remove the thermostat. Reverse the process to install the new thermostat.
You need electronic equipment and know how to to diagnoise the ignition system of the new cars.
fuel pump is the first place i would look
1988 Chevy corsica fuel sending unit whai have a 1988 Chevy corsica i need to no on the fuel sending unit the bib line goes to what line and the two little lines go where please help
Possible starving for fuel. Replace the fuel filter first, then move on from there. Another possibilty, the coolant temp sensor is faulty.
To replace the thermostat on a 1988 535i, first locate the top radiator hose and remove the end connected to the motor. Take out the old thermostat and use gasket cleaner to remove the old gasket. Then replace the gasket and thermostat exactly as it was when it came out. Tighten up the radiator hose over the thermostat.
It goes up.
The 1988 Chevy Corsica air conditioning service valves can be found on top of the air conditioning compressor. The air conditioning service valves are labeled as the low pressure valve and the high pressure valve.
The 1988 Corsica made a lot of sales after its debut in 1988. It was an impressive model weighing approximately 2,589-2,688lbs with a standard 2.0 liter four making 90 horsepower and a five-speed manual transmission.
SIGN UP AT ALLDATA.COM. THEY HAVE ALL YOUR CARS ANSWERS. T HEMPLE
CLICK THE SITE AUTOZONE.COM ON THE RIGHT ---> IT SHOULD HELP YOU