If you have a 3.5L engine, just follow the top radiator hose to the engine. The hose attaches to the thermostat housing. remove the 2 bolts and the thermostat is right there. Do not use the rubber ring sold with the new thermostat unless your housing is plastic. Install new thermostat with the spring facing the engine (down).
Inner or outer?
Try the rad. fan or the rad. fan relay
follow the top radiator hose to the engine and there will be two half inch bolts pull the housing off and that is your thermostat, replace in same position as the old one. p.s. is car overheating may not be thermostat, you can test thermostat in pan of boiling water and see if it opens or closes.
Follow the top radiator hose to the engine. It goes to the thermostat housing. Remove the 2 bolts in the housing and the thermostat is right below it.
No
Might need more coolant or may need to replace thermostat.
A 1997 Dodge Intrepid has two engine mounts and one transmission mount.
No
No
Find the top radiator hose and follow it back to the thermostat housing, which should be located towards the fron of the engine on the intake manifold.
No, a 1997 Dodge does not have a cabin filter.
where is torque conversion sensor on my 1997 didge intrepid?