How do you replace a thermostat on a 2003 Ford Crown Victoria?
The thermostat is on the top-right of the engine toward the front. The upper raditor hose connects to it. MAKE SURE the engine is cold before attempting to remove the thermostat. There are 2 bolts which secure the thermostat housing. Remove the bolts, remove the thermostat housing and the thermostat sits right underneath. Reach in and remove it. There some good pictures at this link to help locate the thermostat housing..http://www.autoclinix.com/Manifold2.htm
where is starter relay located on 03 crown victoria ======================================================== On a ( 2003 ) Ford Crown Victoria : The starter relay is located in the Power Distribution Box ( which is " live " ) located in the engine compartment . It is the ( # 302 relay , one of the four large relays )
2003 Crown Victoria windshield wipers will not turn off how do you determine what to replace the wiper motor or wiper relay switch?
The thermostat for a 2003 4.7 is at the end of the bottom hose not the top. The 2003 4.7 is the only one at the bottom. You have to undo the bottom hose from the engine and the gasket is the rubber around the thermostat and the spring goes on the engine side. 1. Drain cooling system and dispose of coolant properly. 2. Remove lower hose from entry at thermostat housing connected at engine…