0
I have replaced my water pump on my 2000 mpv (after only 4 years) and it was relatively simple. Whatever you do, do NOT bring it to the dealer as most dealers will charge upwards of $650 for what I did in about 2 hours of work in my driveway with a 10 mm wrench and a gasket scraper.
I am not sure how technical an answer you need but basically it is as easy as removing the serpentine belt (a picture of the routing is located under the hood for future reference), loosening the bolts that hold the pump into the housing, carefully removing the remainder of the gasket (I recommend buying a gasket tool which will prevent gouging the housing while removing the gasket) placing the new gasket on the new water pump and bolting the new pump on. Route the serpentine belt and check the top off the antifreeze. Start the engine and check for leaks.
My part (which was ridiculously simple, just a pulley, bearing and PLASTIC 'impeller') cost was $60 and I was refunded $10 when I brought the bad one in.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Where is the Trust bearing placement on 2000 Mazda 626 2.0 liter?
The thrust bearings are inside the engine. You must remove crankshaft to replace them.
How do you replace a 2000 Mazda millenia alternator?
bottom
How do you replace the fan belt on a 2000 Mazda Miata?
There is no fan belt on a Mazda Miata.
How do you replace the water pump on a 2000 Mazda Millenia?
In order to remove the water pump on a 2000 Mazda Millennia, you must first remove the timing belt and the pulley for the water pump. Remove the pump itself by detaching the four bolts that are securing it. Next, replace any gaskets, install the new pump, then the pulley, and then the timing belt.
How much does it cost to replace turbo in 2007 Mazda CX-7?
$2000+ at the mazda dealership
Does a 2000 Mazda B4000 4 liter V6 have a timing belt or timing chain?
timing chain
How do you replace the radiator in a Mazda Protege 2000?
Drain the water from your Mazda Protege radiator. Remove the hoses from your radiator. Remove the radiator stabilizing arm. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
What is the spark plug gap for a 2000 Mazda protege with a 1.8 liter engine?
The recommended spark plug gap is .044"
Does a 2000 Mazda Protege have a timing belt or chain?
According the manual book ,mazda proteges 2000 has timing belt and should be replace at 105 K miles .Hope would help .
What is the valve cover torque on a 2000 Mazda Protege 1.8L?
The 2000 Mazda 1.8 liter engine valve cover torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
When do you replace a 2000 2.2 liter Camry timing belt?
Each 90K miles.
How do you replace the water pump on a 2000 Pontiac Grand Am 2.4L?
how do I replace water pump 2000 Pontiac Grand AM SE1?
