thermostat is located where the lower hose conects to the engine
The spark plug gap for a 1985 B2000 Mazda with a 2.0 liter engine is .8 mm. This is equal to .031 inches.
2000 Mazda Protege 1.6L MFI DOHC 4cylThe Spark Plug Gap.044 (In thousandths of an inch)
A spark plug for a 2003 Mazda Protege has a 14 mm thread size, and a 19 mm reach. The gap is 1.1 mm.
What's the gap size for a 1.6 Mazda
It could be the ICM or the pickup module.
This information is listed in your owner's manual and on a placard under the hood.
(L4) 2.3 liter engine: 1.25mm-1.35mm (0.050in-0.053in) (V6) 3.0 liter engine: 1.29mm-1.45mm (0.051in-0.057in)
Ummm..yes! 4 of them
car stalled at red light and will not start. there is no spark from spark plug, help!
Change the coils they should be two black blocks on top of the engine..the coils could have gone bad.
You have either a blown head gasket or a cracked head
Spark plug wire layout is also known as firing order. The correct firing order for the 2000 Mazda Protege 1.8L is 1-3-4-2 with a counterclockwise distributor rotation.
spark plugs for vehicles with electronic ignition come pre gapped when purchased .044
.044 is the proper plug gap setting.
The ignition coil is attached the cylinder 1. It's a metal box that the spark plug is attached to. On the 2.0L engine, there are two coils mounted in the cylinder head atop the engine.
Looking at your engine you will see on top 2 black blocks (coils) and wires that come out of them into the engine. Pull the wires from the engine, and unscrew the coils from the top and remove them. Once you do, youll be able to see the plugs and remove them.