Want this question answered?
Drain the water from your 1988 Dodge Ram cooling system. Remove the water pump belt. Remove the water return hose. Remove the water pump retaining bolts. Reverse the process to install your new water pump.
Mopar part # 5281090
Power and ground
Loosen the alternator bracket, move it out of the way. The thermostat is at the end of the upper radiator hose where it curves into the engine
Under the hood by the latch in that black box.
Dodge full size van b series B150,B250 all are rear wheel drive with 3 engines v6, 318,360
In the oil pan.
It may be an internal regulator in the alternator. The engine computer is also the voltage regulator.
Back of the engine next to the distributor.
my 94 dodge ram van b150 has a 22 gal tank, gets 16/17 gal a mile city/hwy and gets about 352 miles to the tank
No, there is not. You will have to remove the gas tank. But before you do you need to check power and grounds to the sending unit.
the chiltons manual for my 1990 B150 dodge ram van states 80 inch pounds. For a Ram 2500 with 5.9L Cummins 12 valve engine. The torque should be 18ft-lbs or 24Nm.