on what type of vehicle
how do you replace the belts on a l-1011 fan jet
I believe that you have the VG30 engine, if this is true you have to remove all of the belts and to do that you must find all of the adjuster screws for the accessories that are attached to the appropiate belts and lossen the pivot bolts. once all other belts are removed you can begin replacing. my advice is to replace all the belts while you are there and save your self from the hassle of this again.
It looks like I must remove the front right tire to gain access to the two belts. Is this the case ,if so how difficult would it be to replace the two worn belts?
if its a standard engine with a pulley fan then try replacing the fan clutch. its the silver part attached to the fan and the engine. might need to replace the belts as well.
What kinda model, make? I just had to replace all my belts, serpentine and all... It was a pain, because my water pump went out and broke all the belts. -Jajo ;)
First of all, they are the same as the fan belts on any other car. The fan belt(s) are the serpentine drive belt(s) that turn your fan and other accessories (like alternator, compressor, power steering) They are often referred to as serpentine belts, drive belts, and accessory drive belts. The are located on the outside of your engine, driven by the main pulley (crankshaft pulley). R. Mesyef
Depending on how many miles are on your vehicle. If you have 35k or more you need to replace your serpentine belt or all of your accessory belts. And if you have 89k or more you need to replace your serpentine or accessory belts and your timing belt.
You do not have to re-time your belts to replace the starter.
First you take the old belt off, and then you put the new belt on!!
Look for your belts, the water pump is driven by what used to be called fan belts, so there are a series of belts on the side that your water pump is located, so look on each side of your motor for fan belts that is the side that your water pump is located
one of the fan belts is broken.
Fan belts are used to turn the fan in an automobile to cool off your radiator, or in a computer to pull cool air into the motor to keep it from overheating.