0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Alternator wiring 1993 Volvo 240?
how can i repair a wirie taht has been broken from alternator to wiring harness on 1990 volvo 240?
How do you replace the alternator on a 1986 Volvo 240?
There is abolt on the bottom of the alternator that holds the alternator to the engine. There is another bolt and bracket on the top that adjusts the belt tension. There is a ground wire, power wire from the starter and a wire that connects to the dash light. There are also one or two belts depending on the year and model of the car.
Where can you get an alternator wiring diagram for a 1985 Volvo 240?
When working on anything electrical, a person should have a diagram. The diagram for the alternator wiring for a 1985 Volvo 240 can be found in its maintenance manual.
When replacing an alternator on a 1985 Volvo 240 how many amps does the alternator need to be?
at least 50 A
Will a 1988 glove box for Volvo 240 sedan replace a 1989 glove box for Volvo 240 sedan?
YES
Can you replace the taillight lens of a 1990 Volvo 240 with one from a 1984 Volvo 240?
If they're identical, yes. Try it and find out.
How do you replace an ignition switch in a 1991 Volvo SE Turbo Wagon?
replace ign sw on 1991 volvo 240
Where would the voltage regulator be located on a 1987 Volvo 240 GL?
The VR is on the back of the alternator.
How do you change the alternator belt on a Volvo 240 dl?
Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.
Is the EGR valve expensive or difficult to replace on a 1987 Volvo 240 DL?
It can be a little expensive to replace the EGR valve on the 1987 Volvo 240 DL. The job takes about 1 to 3 hours and can cost as much as about 240 dollars.
How do you replace fan belts in a Volvo 240?
Break loose the Lock nut, with a 1/2" wrench or socket, and use a 10mm socket to loosen the longer tension bolt, and the belt will fall off
How do you replace fan belts in a Volvo 240 DL?
Break loose the Lock nut, with a 1/2" wrench or socket, and use a 10mm socket to loosen the longer tension bolt, and the belt will fall off
