On the '87, it is a simple job. Have the correct wrench's and ratchet socket size's on hand. The Alt. is right on top, just start un-bolting.
follow the upper radiator hose to the thermostat housing
Dexron 3 will do just fine.
MIght be the injector itself.
Begin by removing the alternator belt. Remove the wiring harness from the back of your alternator. Remove the alternator retaining bolts. Reverse the process to install your new Cadillac alternator.
You will need to loosen the alternator belt with the tensioner pulley. When the tensioner pulley is loose the alternator belt will become loose. Put the new alternator belt on and tighten the tensioner pulley.
and the question is?
I am not quite sure how to answer this question........Maybe you meant a 1983 model?... Ford changed to fuel injection in the late 1987 model's. Early 1987 was the last of the carb's. And this is port injection, and not throttle body.
Without more specific information about the noise, it is difficult to determine the exact cause. However, some common culprits for noise in a 1987 Mercury Topaz could include issues with the exhaust system, such as a leaking or damaged muffler, or problems with the suspension components, such as worn-out shock absorbers or struts. It is recommended to have a professional mechanic diagnose and repair the issue.
Most, if not all fords use Mercon. When you purchase your oil at the auto supply shop, just ask. This mercon III, can also be used in G.M.
how do u tighten up an alternator belt on a 1987 BMW 325i?Answerhow do u tighten up an alternator belt on a 1987 BMW 325i?
ur going to take off the long bolt through the alternator and the ground wire red and use a crowbar to pry it from the engine ...your gonna have to move the tail pipe to squeeze it out
Yes the voltage regulator is inside the alternator.