Go to the auto parts store and get a manual for your Forester, like the Haynes. It has a full description of how to do the job. After reviewing the procedure, if you think that your skill level is up to the task, have at it. Otherwise, take it to a professional. --Ken
Ask the mechanic who is willing to do the job. No other answer has any meaning.
There is an axle for each wheel.
The answer is always the same. The only estimate that has any value whatsoever is from the person willing to perform the job. Start with your Subaru dealer. --Ken
The 2000 Ram had u joints, not cv joints at the front axle.
The average cost to repair a CV joint on a 2000 eclipse is about $125. As for the half axle, this might cost about $30.Ê
This is a big job requiring the use of a press to remove and install the bearing. I have done this in my own garage, taking the hub out to a local garage for the press work. However, since you are asking here, you should have the whole job done by a mechanic that you trust. It is a big job. --Ken
75#, I believe.
It is easier and cheaper to replace the entire axle. About $80.
32 mm
It is way easier to replace the whole halfshaft. Espiacially if you have never done a bot on this type of axle shaft.
Replace axle on 2001 buick Lesabre
you need to check that the axle nut does not have left hand thread.it may need to be turned opposite way to come off