You can get a cover plate that conceals the old Plumbing while another single handle new faucet is installed in its place. Moen is the best. See the related link for a site for browsing the plates. You can pick them up at your local plumbing or hardware store.
If this faucet has a spray hose, turn on the faucet and open the spray hose.This will adjust the diverter in the kitchen faucet to the spray and pressureize the hose.This will allow the faucet to equilize and the sputter will stop if the spray diverter is working. It could be that the diverter part in the faucet is defective.
Delta faucet is one of the better brands on the market and if you call their 800 number and give them the model number or type single lever or two handle they will send you the parts and instructions on how to replace the defective diverter
Turn main water supply off in your basement. Adjust or replace shower shut off knob.
You possibly refitted something the wrong way.
it blocks the water from coming out of the spout & redirects it to a different exit point
It's the part of a tub control that makes the water go to either the faucet or the shower.
You have a leak between the diverter and showerhead or the arm for the showerhead is not sealed properly into the fitting in the wall
It is a faucet and tap made by aquabrass (in the 90s I think). My diverter is leaking on my rtm3 faucet and I am looking into repair information with aquabrass their their Montreal location. Martin February 2012
1- plugged shower head 2- defective diverter
You have a cross connection on a faucet somewhere in the house. That means the hot is overriding the cold because of a malfunctioning faucet. Usually happens at the tub/shower diverter if it is a single handle.
The diverter in the faucet is sticking. Instead of the water coming out of the neck of the faucet it is trying to go two places at the same time. This causes turbulence and the hammering.
depends on the faucet a less expensive model you would change the diverter usually located internally under the spout a more expensive model might need a new switch