They are pressed in/out with a special tool that looks like a big c-clamp, they can be done on a press,but is more work/takes longer.
Control arm and ball joint are all one unit.
it has to be pressed out and back in
There's no such thing as a 1995 Ford Tempo...
The CV joints on a 1995 Ford Taurus can be replaced by removing the front tires, and the nuts on the lower ball joint. Next, the lower ball joint will need to be removed and the CV joint can be removed.
To replace a ball joint on a 1995 Honda Civic hatchback, start by safely lifting the vehicle and removing the front wheel. Disconnect the ball joint from the control arm using a ball joint separator or a suitable tool, then remove any bolts securing it to the steering knuckle. Install the new ball joint by reversing the disassembly steps, ensuring all parts are properly tightened and reattach the wheel before lowering the vehicle. Always check the alignment after replacing suspension components.
You have to change the upper control arm.
Remove the tire and wheel from your 1995 Chevy S 10 pickup truck. Remove the ball joint retaining nut. Pound the ball joint out with a hammer.
no you just replace them
You will need to remove the tire and wheel from your Oldsmobile. Remove the retaining not on top of the ball joint. Pound the ball joint out. Reverse the process to install your new lower ball joint.
Remove the tire and wheel. Remove the brake assembly and rotor. Remove the retaining nut from the ball joint. Pound the ball joint out with a hammer. Reverse the process to install the new ball joint.
price on replaceing ball joint 1993 cutlass supreme
Remove old ball joint. Reverse procedure to install new ball joint.