Take it to a mechanic cause if you have to ask your not qualified to touch it and if you don't know what your doing you could kill yourself or someone else
When you replace the brake pads also replace the brake padsensor (used sensorwill not turn out lights), then the light will reset itself automatically
Replace the rear brake shoes with a non-metalic brake lining, new hold down hardware and have the drums turned.
Yes, it is bradded on or glued on.
Hornblende
When the shoes/pads have less than 10% of lining left. When shoes/pads are cracked or damaged. When the drums/rotors are replaced.
A double action brake shoe comprising a shoe, a lining and an oscillator material as main components which function respectively as a reinforcing body of the brake shoe, a brake material and as a generator of certain vibration frequency when the shoe is applied to a hub. The lining is attached on the surface of the brake shoe and oscillator material is inserted between the shoe and the lining.
I'm going to say the secondary (facing rearward) lining on dual-servo drum brake does more work than the primary (facing forward) lining because the rear lining is almost always longer than the front lining to compensate for more wear.
Had brake linings replaced but brake light and check brake lining light will not go out how do I reset.
Some people experience accelerated brake lining wear.
According to the manual there is no adjustment Many times the lining wears on the rear brake shoes and if you adjust the lining to the proper clearance with the drum it will also correct the emergency brake setting You may also need new lining There is a special adjusting device on the bottom of the brake shoes You have to remove the tire and brake drum to observe this
How do you replace from brake on Kia Rio2003
How do i replace brake lines on a 2000 grand am