Replace the rear brake shoes with a non-metalic brake lining, new hold down hardware and have the drums turned.
how to replace an ignition switch for 2005 chevy equinox
HOW TO REPLACE FRONT TURN SIGNAL BULB 2007 EQUINOX
Replace it.
The squealing a scraping is most likely the idle pulley. i would replace that and the belt then see what happens
It is squealing because it is loose or worn out. Tighten it and if that does not help, replace it. If it is a serpentine belt, just replace it and check to make sure the idler tensioner is working properly.
sounds like you need to replace the serpentine belt
Replace the belt.
When they are worn out or causing a problem eg cracked, squealing etc..
Somone needs to answer this.
How can I replace the climate control light on a 2006 Chevy Equinox? Both my heat control and fan speed light are out.
Adjust the belt or replace it with a new one.
If you hear the squealing when applying the brakes, the pads are worn out and need replacing ASAP. Failure to replace the pads immediately will result in worn out rotors which will also need replacing. If the squealing noise is not when braking it may be a worn drive belt.