Lift the vehicle on a car jack, remove the tire, remove the brake shoe/caliper, and remove and properly dispose of the old brake pad. Put in a new brake pad, replace the brake shoe/caliper, replace the tire, tighten the nuts, lower the vehicle to the ground.
How do you replace the ball joints on a 1998 Monte Carlo Z34??
Cant you have to replace the entire radio
The PCV valve for a 1998 Monte Carlo should plug into the valve cover. Twist and pull it to remove and replace it.
How do I remove the back window in a 1998 Monte Carlo? how do I replace this?How do I remove from other Car's model
No, just replace it.No, just replace it.
check your break fluid.
on top of the brake pedal under the dash.
ratchet or socket
how to replace a fuel filter on a 1998 montecarlo how to replace a fuel filter on a 1998 montecarlo
will 2002 monte carlo rims fit 2000 s10
Remove the positive cable from your 1998 Monte Carlo battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
We need to know which engine you have before a complete answer can be given.
Sounds like timing is off,you didn't brake your timing belt did you.
On my 95 Monte Carlo Z-34, the top speed was 114 and started to cut out at 115.
Yes, but I'd say they took the whole car. However i don't know if they were recalled.
It doesn't have a distriburetor.
Check on this web site: http://tss.likeabigdog.com/ Very detailed pictures and instructions.
the easiest way is to pull the upper plenium, of course you want to replace the gaskets at this time as well.
i dont see why not but its much more hassle then its worth. if you want more power start somewhere else
20,688 were produced.
Depends on shop rate or if your doing it yourself. A quickstrut is around 150 each depending on place of purchase. That's what I paid for my Monte. Good Luck
Cant you have to change the whole radio
THis page should help you out: www.sunroofdoctor.com/9599montecarlo.htm
No such thing on this car.