How do you change the choke cable on a 2000 Honda Rancher?
The choke lever is on the left side handle bar under the light control switch.
The 1200 choke system uses a fuel enrichening circuit controlled by a bystarter valve. You would have to remove the lowers and carb. cover to see where the cable is attached.
How do you change the choke cable on a 2000 Honda Rancher?
how to change choke cable
(1) Loosen the choke cable at the cable control bracket but do not remove it. (2) Pull cable knob or lever all the way to closed position. (3) Manually close the choke baffle all the way. (4) Tighten the choke cable at the cable control bracket. (5) Ensure choke opens and closes properly by pushing and/or pulling the cable knob or lever.
any auto parts store can sell you a manual pull on and pull off choke cable.
The choke lever should be down for the choke to be off. In the raised position is choke on.
You need to adjust the Vernier knob on the choke. It is located behind the choke knob. It is a knurled ring that you tighten up to tighten the shaft friction on the choke cable
They are all in the same repair manual from 1982-1988 so it looks like they will interchange.
Yes, but it is an automatic choke system called an auto by starter.
on the left handlebar