if you don't know how it should be left to the pro's. not knowing what your doing could prove to be fatal due to the weight of the transmission if anything goes wrong. not to mention the equipment required to remove the trans will cost you big bucks.
so my best advise to replace clutch is to pay someone to do it for you, you will be happy and alive at the end of the day.
Clutch slave is seled unit. replace clutch
We'd need to know what model of truck your International is (International makes Class 5 through Class 8 trucks), as well as what your transmission is... if you're running, say, a 4400 with an Eaton six speed, the time involved will be a lot less than if you had, say, a ProStar with an Autoshift transmission.
yes just replace the fan clutch assembly
first check your clutch slave cylinder for leaks, if its leaking ,replace and bleed system,if its not leaking,bleed system ,dont forget to bleed clutch damperand if its still not right, then replace clutch master cylinder.
The estimated cost to replace a clutch and radiator, in a 1989 Nissan pickup truck is $1100. A private mechanic may be able to do the job for less.
I need to replace release bearing in a 1995 Chevy s10 truck and need to know how to disconnect the hydraulic clutch line for the transmission.
It's built into the water pump. You have to replace the water pump.
Where is the clutch fluid on 1993 nissan pickup truck.
You will need to remove Transmission, And you will see it in the bellhouseing. 4 bolts hold it in place.
If it is a stright stick, then the clutch is sliping. Need to replace clutch and pressure plate and turn fly-wheel. Replace throw out bearing If it is a automatic trans then it's burnt up. NEEDS REBUILT
Replace clutch cable on sportsbike
To replace a throw out bearing in any car or truck you must remove the gearbox, then remove the clutch, then pull the bearing out of the flywheel and replace it. Assemble in reverse order.