First you have to take off the interior door skin. Then you will need to remove the rivets that mount the window motor to the door. An Air chisel is the easiest way (be careful not to damage the fiberglass) but you can use a drill and a very good bit. Using the drill method you may find that you wished that you took it somewhere to have it done though. Slide the window out of the track and carefully rest it inside the door. Unbolt the vertical track. Unplug the electrical harness. Slide the rest of the regulator wheels out of the tracks and then fish the whole assembly out of the door. In the words of Mr Haynes, Assembly is the reverse of disassembly.
yes
Show me you how to install window motor for 1992 Chevy camaro
Replacing 2002 Dodge power window motor driver side
I need instructions on how to change the window motor in 1995 Chevy Camaro.
tom
How do you remove and replace the motor for the drivers side power window in a 2000 Sienna
Must replace window regulatorhttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-motor-regulator
It could be the switch,power source to the switch, or the motor is burnt up. More than likely the motor is the problem since the driver side get a great deal more use than any other.
bad power window motor
I would try the window switch first , but if you are going to replace the switch then you will see how to replace the motor. You would have to take the door panel apart after that its easy.
change the window motor as it's getting hot and shutting down.
video on how to replace window lift motor on j30