Want this question answered?
The 2000 Ram had u joints, not cv joints at the front axle.
Remove the rear U-Joint and be very careful not to loose caps or any needle bearings. Uses lock rings to hold it in place. Tape it together with duck tape. Now pull the drive shaft out of the transmission and remove the front U-Joint from the driveshaft and replace it. Reinstall in reverse order.
this link is for front wheel joint but maybe you can find something therehttp://www.pavementsucks.com/tech/hub.php
take the wheel off take brake caliper off take spindal nut off pull axle out. I had to burn my old u joint out with a torch and I have a 2001 1500. I hope that helps you.
front drive shaft, how do you get the yoke out of the transfore case to replace the ceal?
No.No.
yes you can
Sounds like a bad CV joint. On most cars, it is often more economical to replace the complete axle shaft on that side that has a bad cv joint. Hope this helps. Good-luck!
what year interchange with a 2002 dodge ram 1500 front bumber
The automatics are not interchangeable.
A 1998 Dodge Ram does not have EGR.
The left front speed sensor is electric and does not have a cable. The sensor is accessed by removing the brake rotor.