Removing Front & Rear Rotors Well Guys...
I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT.
I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off...
The way I removed the Front & Rear Rotors was ...
1. I put lots of PB Blaster in the back and the front of the rotors to be removed.
2. I put plenty of tension with the 3 Jaw Puller...
3. I hit the back of the rotor with the sledge hammer...
And it came right off...
Hope this helps someone out there...
How do you change the front rotors on a 2004 Chevy tracker
Removing Front & Rear Rotors Well Guys... I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT. I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off... The way I removed the Front & Rear Rotors was ... 1. I put lots of PB Blaster in the back and the front of the rotors to be removed. 2. I put plenty of tension with the 3 Jaw Puller... 3. I hit the back of the rotor with the sledge hammer... And it came right off... Hope this helps someone out there...
how do you remove front rotors from a chev 2004 silveraldo crewcab not 4wd
reset engine light on 2005 Chevy Colorado 3.5 engine
The 2004 Ford Expedition has 63 in. of front hip room.
The 2004 Ford Expedition has 39.7 in. of front head room.
The 2004 Ford Expedition has 63.4 in. of front shoulder room.
The 2004 Ford Expedition has 41.2 in. of front leg room.
The front track of the 2004 Ford Expedition is 5 ft. 7 in. (67 in.).
Removing Front & Rear Rotors Well Guys... I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT. I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off... The way I removed the Front & Rear Rotors was ... 1. I put lots of PB Blaster in the back and the front of the rotors to be removed. 2. I put plenty of tension with the 3 Jaw Puller... 3. I hit the back of the rotor with the sledge hammer... And it came right off... Hope this helps...
Removing Front & Rear Rotors Well Guys... I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT. I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off... The way I removed the Front & Rear Rotors was ... 1. I put lots of PB Blaster in the back and the front of the rotors to be removed. 2. I put plenty of tension with the 3 Jaw Puller... 3. I hit the back of the rotor with the sledge hammer... And it came right off... Hope this helps someone out there...
I worked on a 2003 today and it had both. It had rotors up front and drums in the rear.