How do you replace front turn signal bulb on 1994 geo prizm?
i reached in through the fender well and changed the bulb that way
If it is a front bulb, sometimes you can get to the bulb and remove it by turning it counterclockwise. If it is the rear you have to remove the housing and then remove the bulb. Remove the (4) 7mm Hex screws that fasten the wheel well liner. Pull the liner back as needed. Then reach in and remove the bulb by twisting the connector to release the connector and bulb from the turn signal…
My 1994 Buick Lesabre left turn signal works however the right turn signal does not. What should I look for or replace.?
If you are talking about the turn signal light. You have to remove one screw that holds the turn signal onto the frame of the car. Just look down staring at the turn signal and you will see it. Remove the screw, move the blinker forward and then remove and replace the light bulb. Reverse directions to reinstall.
Unless you have a GSI prizm I am not sure if they were made after 92 you would have brake shoes on the rear, pads in front.I just replaced rear shoes on a 97 and the 94 is the same car.They are hard to replace if you do it yourself pay close attention to how they look before you remove them, they are tricky. Patience is the key to this job.