jack up truck on stands, take wheel of , brake pads, then rotor lock nuts, rotor, after there are 5 nuts (15mm) take them of and that's all.
u use duct tape
Have 1996 ranger4wd front abs sensor frozen on spindle any suggestions
how do i replace front wheel bearinbs on 2000 ford ranger 4wd
The spindle is an assembly that is part of the front suspension at the front wheels on a 2 wheel drive , on a 4X4 it is called the steering knuckle. There is 1 for each front wheel
It depends on the make and model of the minivan.
A 1998 Ford Ranger is rear wheel drive ( or 4X4 capable )
No. Rear wheel drive or 4wd
The front wheel bearings must be pressed into and out of the spindle/hub assembly. You will need to take the spindle assembly to an automotive machine shop to have this done.
The front spindle nut size is 36mm on a 2003 Durango 2wd. I found this out after 3 trips to the parts store...
No. The Contour is a front-wheel drive car, and the Ranger is rear wheel drive.
If it is a 2w drive then it is 185 ft. lbs.
If the automatic 4x4 works but the front hubs do not engage in a 1994 Ranger, there is no 4 wheel drive. The transaxle for the 4 wheel drive has to be repaired.