The front wheel bearings must be pressed into and out of the spindle/hub assembly. You will need to take the spindle assembly to an automotive machine shop to have this done.
You will have to take out all of the parts to do this. Unless you have some experience with doing automechanics, it is a good idea to take it in.
Cut it out and weld a new one in.
Simply raise the car and support the engine on a jack, then unbolt it.
The wheel bearing is part of the hub assy. it the part that the wheel attaches to. If you take your tire off you can see a round piece with 5 suds, that the hub assy. and the bearing is behind it.
Because it doesn't have one. The wheel bearing is a separate part that is installed into the spindle assembly.
The distributor in a Mercury Villager is the round thing at the front of the engine with the six spark plug wires attached to it.
Front wheel drive
breaks are off what's the next step to changing wheel bearings
Bottom front of engine.
It is on the front of the engine on the end of the crankshaft.
In front of the engine, down in the "V".
how do you change wheel bearing on 98 mercury mountaineer