Empty fuel from tank. Drop fuel tank. Sender is on inside of tank on front. Float could have pin hole causing false reading.
The fuel level sensor can only be replaced by first removing the fuel tank. it then can be easily removed from the top.
need to drop the tank and pull the fuel pump out and change the sensor
no
I assume you mean the fuel gauge that tells you how much fuel there is left. The reason is that the fuel sensor is stuck. This fuel sensor is a mechanical fuel sensor that rises with the fuel level in the gas tank. A really ridiculous design for a fuel level sensor. It gets stuck and you will need to replace it. Its the same amount of time to replace it as to replace the fuel pump. Just leave it until the fuel pump goes bad, then you can do both.
To change the fuel level sensor in a 2000 Chevy Impala, first close the gas and power lines. Remove the wiring and then drop the car tank. Remove the old fuel level sensor and replace it with the new one.
Hi, If you are referring to the fuel level sensor, it is located in the fuel tank and is mounted on the fuel pump assembly. Draining and dropping the fuel tank is needed to replace this sensor. Good Luck, Greg
fuel level sensor
Fuel level sensor is in the tank with the fuel.
fuel tank pressure sensor or fuel tank level sensor? fuel tank level sensor is attached to the fuel sending unit, fuel tank pressure sensor is on top of the fuel tank.
The fuel level sensor is on the fuel pump module in the tank.
If the vehicle will stall and will not restart or appears to be out of fuel but the fuel gauge reads above empty, replace the fuel sensor assembly and auxiliary tank fuel level sensor if equipped. if not, replace the instrument cluster.
The fuel level sensor? It will be in the tank.