The main battery fusible link (120) is in the fuse box under the hood right by the battery. It is easy to see if it is blown because it has a clear window on the top of it. Before you replace it, verify why it blew in the first place....otherwise the new one will blow right away as well. It is secured by 2 screws, one 10mm and one 8mm. The only way to take it out and replace it is to use a small flathead screwdriver to unfasten the clips holding that half of the fusebox to the other half (three clips on back side and two between the two haves of the fuse box if I remember right), then you will be able to pull up on the half containing the fusible link to gain access to the two screws. The two screws each hold one wire to the link. Take out the screws, pull up on the fusible link to take it out, put the new one in, put screws back in, snap that half of the fuse box back in place......Done.
i had the same problem, i own a pathfinder i replace mine and now it works perfect so i created a howto check it out http://www.wallpaperama.com/forums/nissan-pathfinder-how-to-replace-suspension-links-t6856.html
what are fusible links
In the under hood fuse box, driver's side fender.
the 2002 Stratus have no fusible links
how do you locate the fusible links in 92 Toyota Camry
Correct fitment and style options will vary by exact make, model and year. Punch in your specific year Nissan Pathfinder below in Sources and Related Links. This will give you a few choices.
I had sway bar links replaced on my 2003 Ford Escape. Cost- $220 w/ labor. The parts are pretty cheap of course and easy to install; it's the "book" labor that jacks up the price.
Fusible links are generally in the harness next to the battery.
Believe it or not but the fusible links are bolted on. The fusible links are in the fuse box in the engine compartment. They are 2cm square boxes with a clear window on top to view the link. Undo the 2 bolts holding the fuse box to the inner guard. Unclip the top and underside cover of the fuse box There will be a white cover under the fusible links Pry that off with a flat blade screwdriver. From the top of the fuse box push the screwdriver down the 2 slits either side of the fusible links (set of 3). This section now drops down revealing the bolts. One side is 8mm and the other side is 10mm. Undo the bolts on either side of the fusible link. The fusible link can now be pulled straight up. Replace the fusible link and reverse the steps above to install.
The fusible links on GMC sierra are on the firewall, left side (passenger) of engine compartment.
fuse and fusible links are located in the lower, not ground low, front of engine. A little to the drivers side.
The fusible links on a 1995 Explorer are located on the side of the alternator. Follow the red power wire from the battery to the fuse links.