Want this question answered?
The headlight assembly is only held on by a couple screws and can be replaced in a couple minutes.
If you're talking about the headlight, the "lens cover" is not a separate part, you need to replace the whole headlight assembly.
It's easier and more economical to replace the axle assembly with a rebuilt one.
The converter assembly is a bolt on part, or you can cut out and weld in generic units to replace the existing ones.
To replace the headlight assembly on a 2006 Jetta, remove the front grill. Then remove the headlight assembly by taking off the screws that secure it in place. Replace with new.Ê
Unless you have a California model, the converter assembly sells in the aftermarket for about $300.
You either bolt on a new assembly, or cut the old ones out and weld generic units in place.
On older vehicles you replace the entire headlight. On the newer vehicles you just replace the bulb unless the headlight assembly is damaged.
You don't, you replace or rebuild the engine.
how to replace the headlight light assemble on a 2001 e320
The front wheel bearings must be pressed into and out of the spindle/hub assembly. You will need to take the spindle assembly to an automotive machine shop to have this done.
Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.