Same as described for the Honda CR-V:
"It's simple , i changed both my bulbs in under 5 min... first start by unplugging the plug from the bulb... take off the rubber surrounding around where the plug plugs into the bulb .. there is a little metal clip that u just have to slip out from under a little hook that holds it down...once that's unlatched you just pull out the old bulb and place the new one in very gently... you should go in exactly how the old bulb did ... then just relatch that little metal clip , pop the rubber surrounding back on making sure you put it on write with the side labeled top on the top , then just plug the socket back into the bulb... simple as that..."
== ==
drop the bumper and take the headlight housing out
To change a Honda 300 Fourtrax headlight, first unscrew the lens and remove it, twist the bulb out of the socket, insert a new bulb and then replace the lens.
call macgyver
2006 Honda Ridgeline headlight bulb lamp replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
To change the headlight on a 1985 Honda Spree scooter remove the headlight housing. The scooter headlight will be mounting on the rear of the housing. Remove it and replace the bulb.
Replacing a headlight bulb on a Honda Passport is very easy to do. The hood will need to be opened to change the bulb. The old bulb can be pulled off by using the connector and the new one put in. No tools are required.
remove plug , then remove round rubber cover it just pulls off , third need to thin wire retainer clip you have to oush in and then up to release , then retainer wire will hinge back slide bulb straight out
The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.
Changing a 2007 headlight bulb is very easy. You will need to open the hood and find the bulb at the corner of the headlight assembly. Then you will turn the bulb socket counter clockwise to remove. After the bulb is out, you will replace it with a new one and screw it back into the headlight assembly.
Replace headlight bulb only when blown.
You pop the hood take and reach behind the headlight and pull off the bulb cover then pull the bulb out and put the new one in.