You will have to take the transmission out of the truck first.
Then look up in the bellhousing and you will see it. It just pulls off with your hand.
It has a hydraulic operated throw out bearing.
Yes, the clutch throwout bearing is hydraulically operated.
I need to replace release bearing in a 1995 Chevy s10 truck and need to know how to disconnect the hydraulic clutch line for the transmission.
how do you replace the rear wheel bearing on a Chevy pick up
A wheel bearing is pressed in to the hub so that it is able to safely operate. To replace a bearing on a Chevy Impala remove the hub from the car and take the unit to a machinist. Have the press out the old bearing and press in the new one.
you have to remove transmission to take out and replace throwout bearing
If, after close inspection you do not see any damage to hub, you can use it. But ALWAYS install new bearing race with bearing.
Front or rear?
Which part do you want to replace? The slave cylider or the master cylinder? The hydraulic line and master cylinder.
how do you replace a wheel bearing assembly on the left side of a 2007 chevy tahoe with 4wd and abs brakes
taking out rear hub asembly on a 2002 Chevy ventura
Remove the tire and wheel from your 2001 Chevy Impala. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing. Reverse the process to install the new front wheel bearing.