Want this question answered?
Personally I don't know how to replace a Chevy Blazer windshield, but attached is an article from wikihow that could help you out. If that looks complicated or you can't find the windshield glass check out your local glass shops or websites.
There are 2, 4" x 10" speakers in the celing tward the rear of the full size blazer (next to the hatch glass).
You will have to remove the screws, with an impact. They do remove, but be careful not to break the glass. The only thing keeping the nut from turning is the glass. The screws have threadlocker on them.
The Blazer was a decent vehicle which had its quirks. The rear seal on the Chevy small blocks are notorious for needing replacement, as is the intake manifold gasket. Body wise, the actuator arm for the rear glass is prone to breaking, and will need replacement at some point in the vehicle's service life.
id like to know same problem
i recently had to replace the passenger side mirror of my 93 blazer, at first i attempted to fix the white mirror mounts behind the glass, but they wouldn't sit right after some frustration i decided to go to the junk yard and pay $10 for a new power mirror, this is most likely ur best bet
1994 and up should.
remove the inner pannel. That will put you at the assembly. with windo up, remove assemblt. then replace
You should be able to I have a 87 Chevy celebrity and I found just the glass at an auto parts store they have a section with just the mirrors and on the back of the mirrors it tells you which vehicle it is for. you.
See the link I added.
I had this issue on my '87. I pried the plastic panel out of the channel enough to work the prybar into the latch and work it open.
Many glass repair groups or home improvement companies are willing to come take out the glass and then replace it. There is no reason that you would have to replace the frames.