I had this issue on my '87. I pried the plastic panel out of the channel enough to work the prybar into the latch and work it open.
take it to a transmission shop
The basic piece is the same but there will be different trim pieces attached that you will need to remove.
How to Remove the Steering wheel From a Chevy Blazer 2001
how do you remove the dashboard of a 2002 Chevy blazer
First you need to remove the trim bezel around the handle on the outside of the tailgate. Then remove the three bolts on the inside of the tailgate,that hold the handle in place. Next remove the latching mechanism rods from the handle,and remove the handle from the tailgate.
No. IIRC, all models of the Blazer from 1995 - 2005 had either a single door which was hinged at the top and raised upwards, or a split door (which are extremely rare) - not a drop down tailgate like what a pickup has.
Open the tailgate. Notice the two small Phillip head screws along side the taillight assembly area. Remove the two screws and you can wiggle the taillight assembly out so you can change the bulbs.
Buy a can of lock unfreeze or wd-40
Simply remove the cables that support the tailgate. They just clip off. Support your tailgate so that you don't scratch the paint. Lift the tailgate towards vertical, lift and one side will now come off the hinge. Remove the tailgate from the other side by pulling horizontally. Reinstall oppposite to these directions
I have a Chevy Blazer 2000 4 Wheel Drive ZR2 The Spare Is On The Back With a Lock How do I remove the Spare Tire Thank You
The latch assembly and cable is one piece.
is it factory or an add on?