Undo all the clips holding on the front bumper plus about 6 bolts remove bumper, undo bolts holding the headlight assembly. Remove headlight, carefully undo clip holding HID bulb make sure the power is off as the voltage is more than enough to kill a person, change bulb being very carefull not to touch glass as this will shorten bulbs life and asthey cost about $125 each a little extra care is in order. reassemble and check they work.Not really a bad job just seems like a lot of work for a bulb, I tried doing it without taking the bumper off and had TO CHANGE THE BULB AGAIN WITHIN 6 MONTHS- I TOUCHED THE BULB, just a fingerprint .
If only the low-beam is out, you will need to replace the low-beam bulb. It is probably not necessary to replace the entire headlight assembly.
how to replace 2007 Mercedes GL450 Headlight Bulb Low Beam
Carry it to dealer who will replace on low beam headlight for $15 +/- dollars in about 5 minutes.
The Low Beam AND High Beam are in the same bulb. The procedure to change it will be in the owners manual.
replace the low beam headlight bulb
replace passenger side low beam headlight
If you found the answer can you let me know. I have 1990 525 passager side low beam needs replaceing.
you will probably have to replace the headlight switch.
The headlight has two filaments. One for the high beam and one for the low beam. The most likely reason the high beam is out is because the high beam filament is broken. Replace the bulb and it should fix it.
Headlights that serve as a high and low beam have two different filiments in them. The low beam filiment is most likely burnt out. Time to replace it.
Begin by removing the wiring harness from the back of your 1989 Silverado headlight assembly. Remove the low beam headlight assembly retaining bolts. Reverse the process to install your new low beam headlight.
There is no fuse that is just for low beam. There is however a headlight fuse. Look in your owner's manual for the location.